
Stone sealing for Seminole pool decks and patios
Travertine Sealing in Seminole, FL
Call (727) 619-2341 for a free estimate on a travertine pool deck, patio or walk in Seminole.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can someone seal travertine at my Seminole home, and how soon do I hear back?
A local contractor can seal travertine at homes across Seminole, FL, and you will hear back within 1 business day, usually much sooner. The visit and the written price are free. Call (727) 619-2341 to start.
Travertine holds a warm, sandy color that looks good beside a pool, but the stone drinks up water and spills. Sealer slows that down so a dropped drink or a muddy footprint rinses off instead of settling in. A stone-safe product is chosen after a test in a hidden corner, since not every sealer suits porous stone. Describe the deck, the lanai floor or the walk when you request a free estimate.
What sets travertine apart from concrete pavers?
Travertine is natural stone. Wikipedia explains that it forms when calcium carbonate settles out of fresh water, and that its surface is marked by pitted holes and troughs. The same page says fresh travertine runs from about 10 to 70 percent porosity. A stone that open soaks up liquid fast, so ask a contractor about it when you request a free estimate.
People have used the stone a long time. The quarry at Tivoli, outside Rome, has been worked for at least 2,000 years, and Wikipedia lists travertine among the stones used for patios and garden paths. A concrete paver is a poured product, while this is a cut piece of rock, so the care is different. To talk it through, call (727) 619-2341.

Does travertine need sealer at all?
Not always. One travertine supplier says plainly that sealing is optional, and that unsealed stone should simply be cleaned with a method that suits it. People seal because of the stains, not because the stone will fail without it. Weigh that against your own use when you request a free estimate.
Think about who walks on the deck. Wet feet, drinks, suntan oil and pool splash all land on a pool surround, and an open stone holds each of them. A sealed surface lets a hose do more of the work. If those pressures sound like yours, call (727) 619-2341 and ask what the contractor would use.
Which sealer goes on travertine, a penetrating one or a surface coat?
A Pinellas County paver company puts a penetrating sealer on travertine and marble instead of a topical coating, because a surface layer can trap moisture and haze over time. Penetrating products come in versions that deepen color and versions that leave the stone as it is. Ask which one you are being quoted when you request a free estimate.
The travertine supplier draws the same line between products that soak in and coatings that sit on top, and says the choice should match the stone, the finish and the location. Unilock adds that sealer should be tried on a small spot first. A corner test costs nothing, so request it when you call (727) 619-2341.
Soaks in
A penetrating sealer works below the surface, so the stone keeps something close to its natural look.
Sits on top
A film coat can add shine, yet it can also hold moisture against stone that is already full of tiny holes.
Deepens color
Some penetrating products bring out the tone of the stone. Others leave it alone. Pick before the work starts.
Try a corner
A small test patch shows the color change and the grip before the whole deck is done.
Paver Sealing Seminole Is Happy to Help Across Pinellas and Hillsborough Counties
What does acid do to travertine, even when it is sealed?
Carbonate stone reacts with acid, and that reaction leaves a dull spot called an etch. The supplier's guide says acid can still etch the stone after it has been sealed, so a sealer is not a shield against it. A contractor should name the cleaner before it touches your deck. Raise it when you request a free estimate.
Wikipedia gives the root cause: travertine is made of calcium carbonate, and even the weak carbonic acid in rainwater can dissolve some of this kind of rock. Strong acid does the job much faster. If a cleaning plan leans on acid, call (727) 619-2341 and ask for a different one.
Is a salt water pool harder on a travertine deck?
The supplier says outdoor pool areas, salt water ones included, have conditions of their own, and it warns against assuming that extra sheen suits a pool deck. Seminole is minutes from the Gulf, which means salty air can drift this far. Mention the type of pool when you request a free estimate.
A coating can change the walking surface, so wet-area grip should be checked with the installer or supplier. One Pinellas County company adds a slip resistant additive to each pool deck seal. Ask whether that is offered for stone and how it looks once dry. Call (727) 619-2341 to compare answers.

How do Seminole's low ground and summer rain treat a travertine deck?
The city sits about 3 feet above sea level and holds the lower half of the lower limb of Lake Seminole, according to Wikipedia. Low ground stays damp. Wikipedia also says nearly two thirds of the rain in Pinellas County falls from June through September. Stone that stays wet grows green, so mention shade and drainage when you request a free estimate.
A local paver company reports that lots near the lake with heavy tree cover grow algae and mildew faster than open, sunny ones. A porous stone gives algae plenty to cling to. That is another reason to seal it and to keep the spray angle low. For a visit, call (727) 619-2341.
Sealing day has to avoid storms. The same company says to stay off the surface for at least 24 hours, keep cars off for 48 and allow 48 to 72 hours for a full cure, and it notes that summer humidity can stretch that a little. Plan the pool schedule when you request a free estimate.
What does travertine sealing cost in Seminole?
No page gives one rate for travertine by itself, so this table sets the published pieces side by side. Tampa Bay paver companies publish $1.00 to $1.75 a square foot in Seminole to clean, sand and seal, and $1.25 to $2.50 across the wider area. Stone is described as costing a little more, so read the high end first. To get a number for your deck, request a free estimate.
One published job helps. An 850 square foot travertine pool deck, with a full wash and a stone sealer, was priced at $1,400 to $1,650. Divide that out and it is about $1.65 to $1.94 a square foot. It is one job, not a rate card, but it shows where stone tends to land. Call (727) 619-2341 to compare it with your own.
| What is priced | Published figure | What it means for a deck of 800 sq ft |
|---|---|---|
| Clean, sand and seal pavers, Seminole | $1.00 to $1.75 a sq ft | $800 to $1,400 |
| Clean and seal, wider Tampa Bay area | $1.25 to $2.50 a sq ft | $1,000 to $2,000 |
| Stone pool deck, 850 sq ft, full wash and stone sealer | $1,400 to $1,650 for the job | About $1.65 to $1.94 a sq ft |
| Minimum project charge | $500 to $1,000 | Applies to small areas |
| Stone or brick surfaces in Seminole, as quoted by a power washing company | $500 to $1,000 or higher | Starting point, not a rate |
These figures come from Tampa Bay paver and power washing companies. A visit to the stone settles the final figure. Stripping an old coat, replacing broken pieces and tinting cost extra.

What does sealed stone look like around Seminole pools?








What is the travertine sealing process, from first look to cure?
Five steps, in order, from a look at the stone to a walk around the finished deck. The contractor explains each one and you decide before work begins. For questions about any step, call (727) 619-2341.
1. Look and test
The contractor checks the stone for stains, etching, loose pieces and old coating, then tries a product in a corner.
2. Wash gently
A stone-safe cleaner and a low spray angle lift dirt and algae. Unilock keeps spray at 30 degrees or less.
3. Let it dry
Unilock says to wait at least 24 hours after cleaning, longer in cool shade, before any sealer goes on.
4. Seal the stone
The sealer chosen for travertine goes on in measured passes, at the coverage on the label.
5. Cure and walk it
The contractor says how long feet, furniture and cars stay off, and checks the finish with you.
Which parts of Seminole does this reach?
The city of Seminole, plus nearby places such as Bardmoor, a census place between Seminole and Pinellas Park with 4,555 housing units in 2020, according to Wikipedia. Seminole itself counted 11,216 housing units that year, up from 7,297 in 2000. To check your street, request a free estimate.
Frequently Asked Questions
How often should I seal pavers in Florida?
Unilock says every 3 to 5 years for concrete pavers, and a Pinellas County paver company lists a 2 to 4 year life for its sealer. Travertine is a different stone, so ask the contractor what interval fits the product chosen. Sun, rain and pool splash all shorten it.
What is the average cost to seal pavers in Florida?
Tampa Bay paver companies publish $1.00 to $1.75 a square foot in Seminole and $1.25 to $2.50 across the wider area for a clean, sand and seal. An 800 square foot deck lands near $800 to $1,400 on the Seminole figure. Natural stone can cost a little more.
How much does it cost to seal travertine pavers?
No page gives one rate for travertine alone. One published job, an 850 square foot stone pool deck with a full wash and a stone sealer, was priced at $1,400 to $1,650, which is about $1.65 to $1.94 a square foot. Your size, condition and sealer move that number.
What sealer is best for pavers in Florida?
It depends on the stone. A Pinellas County paver company uses a penetrating sealer on travertine and marble, because a surface coating can trap moisture and haze over time. Concrete pavers often take a film sealer instead. Have the product named in the quote, with a reason it fits your stone.
Will sealer stop travertine from etching?
No. One travertine supplier says acid can still etch carbonate stone, sealed or not. Sealer slows stains from soaking in, but a splash of acid can still dull the surface. That is why the contractor should be asked which cleaners go on the stone.
Does a travertine pool deck get slippery after sealing?
A coating can change how the surface feels underfoot, and one supplier warns not to assume extra sheen suits a pool deck. A Pinellas County company adds a slip resistant additive to every pool deck seal. Ask for a small test patch and walk it wet.
Why does my travertine have small holes in it?
Those pits are natural. Wikipedia describes travertine as having pitted holes and troughs, and says fresh travertine ranges from about 10 to 70 percent porosity. Holes can be filled during installation, and a sealer works on the stone around them.
Can new travertine be sealed right away in Seminole?
Wait for the install to settle first. For concrete pavers, Unilock says 60 to 90 days so salts can clear, and it asks for 24 hours of dry weather around the work. Give the contractor your install date so the plan fits the stone.
Want your travertine protected from stains?
Tell a contractor where the stone is and how it looks. The estimate is free, and the first reply comes within 1 business day, usually much sooner.
Free, no obligation
